Browsing BCCCE - International Balkans Conference on Challenges of Civil Engineering by Title

DSpace Repository

Browsing BCCCE - International Balkans Conference on Challenges of Civil Engineering by Title

Sort by: Order: Results:

  • Fatih Celik; University of Gaziantep; Hanifi Canakci; University of Gaziantep (International Balkans Conference on Challenges of Civil Engineering, 2013-07-15)
    This paper discusses the results of a series of direct shear test that were undertaken toinvestigate the behaviour of organic soil with granular soil column. The tests focused oneffect of diameter of granular column in ...
  • Mehmet Ardiclioglu; Epoka University; M. Salih Kirkgoz; Cukurova University (International Balkans Conference on Challenges of Civil Engineering, 2013-07-15)
    Distributions of shear stress throughout the entire cross-section within the fully developedboundary layer region in a smooth and rectangular open channel flow setup areexperimentally determined with the help of a laser ...
  • Shkelqim Daja; Polytechnic University of Tirana; Cercis Durmishi; Polytechnic University of Tirana; Agim Sinojmeri; Polytechnic University of Tirana; Neritan Shkodrani; Polytechnic University of Tirana (International Balkans Conference on Challenges of Civil Engineering, 2013-07-15)
    One of the most important aspects of coastal management and planning programs thatneeds to be investigated is shoreline dynamics. Long-term coastal analysis uses historical datato identify the sectors along the coast where ...
  • Suleyman Adanur; Karadeniz Technical University; Mehmet Akkose; Karadeniz Technical University; Alemdar Bayraktar; Karadeniz Technical University; A. Aydin Dumanoglu; Avrasya University (International Balkans Conference on Challenges of Civil Engineering, 2013-07-15)
    This paper presents the finite element analysis of a suspension bridge subjected to earthquake ground motion using simplified models. For this purpose, two simplified models are considered. It is assumed that each element ...
  • Fatih Unes; Mustafa Kemal University; Necati Agiralioglu; Istanbul Technical University; Mustafa Demirci; Mustafa Kemal University (International Balkans Conference on Challenges of Civil Engineering, 2013-07-15)
    Density inflow is modeled in two dimensions through a reservoir with sloping bottom. If an in flow of higher density enters ambient dam reservoir water, then it plunges below theambient water and then becomes density ...
  • Okan Karahan; Ryerson University; Erdogan Ozbay; Erciyes University; Cengiz Duran Atis; Erciyes University; Anwar Hossain; Ryerson University; Mohamed Lachemi; Ryerson University (International Balkans Conference on Challenges of Civil Engineering, 2013-07-15)
    The compressive strength behavior of concrete is one of the fundamental parameters of structural design as most load-bearing concrete elements, such as beams, columns and slabs. However, it was known that compressive ...
  • Ince, Ragıp; Yilmaz, Senem; Gör, Mesut (2nd International Balkans Conferance on Challenges of Civil Engineering, 2013-04-23)
    The experimental investigations on fracture mechanics of cement-based materials until 1970s indicated that classical linear elastic fracture mechanics (LEFM) is invalid for quasibrittle materials such as concrete. This ...
  • Kostandina, Dhefto (International Balkans Conferance on Challenges of Civil Engineering, 2013-05-23)
    Based in the world experience about on the seismic design of new bridges and retrofitting of existing ones, now days in Albania it is one of the priority to the implementation of modern codes (Euro codes). Generally the ...
  • AKPINAR, Adem; ONSOY, Hizir; KOMURCU, Murat Ihsan; BAYRAM, Adem (2nd International Balkans Conferance on Challenges of Civil Engineering, 2013-05-23)
    The South-eastern Anatolia Region has political, economic, commercial and strategically importance as well as religious due to the fact that it has been used as settlement, and hosted for divine religions. This region ...
  • Tupputi, Giuseppe (2016-05)
    In the twentieth century, the place of the public building was identified, in several architectures, with the space of the hall. Starting from the generality of hall typology, it can be achieved many different types of ...
  • Manahasa, Odeta; Gjuzi, Bjorni; Ukperaj, Olster (2020-12-18)
  • Onochie, Kenechi Kurtis; Rezaei, Alireza (2016-05)
    The ability of a structure to withstand stresses starts from the nature of the soil on which it is built and the suitability of the foundation adopted for the corresponding soil condition. There are different types of ...
  • Carbonara, Giovanni (2016-05)
    The project which stands on a previous building is always a complex task that requires the appropriate technical and cultural knowledge. The architectural survey is the action to reach the full knowledge of a building, to ...
  • Slavko Zdravkovic; Faculty of Civil Engineering and Architecture of Nis; Tomislav Igic; Faculty of Civil Engineering and Architecture of Nis; Biljana Mladenovic; Faculty of Civil Engineering and Architecture of Nis; Dragan Zlatkov; Faculty of Civil Engineering and Architecture of Nis; Dragana Turnic; Faculty of Civil Engineering and Architecture of Nis (International Balkans Conference on Challenges of Civil Engineering, 2013-07-15)
    The paper presents the basic theory and corresponding equations for calculation of the static influences of the structures with semi-rigid connections in joints. The static design of system in which connections of members ...
  • Scricco, Francesco (2nd International Balkans Conferance on Challenges of Civil Engineering, 2013-05-23)
    The study aims to analyse the two static models most widely adopted by Bernardo Antonio Vittone, through the comparison of two churches in Turin: Santa Chiara and San Leonardo. They are double envelope buildings, with ...
  • Fittipaldi, Graziella (2nd International Balkans Conferance on Challenges of Civil Engineering, 2013-05-23)
    One of the characteristics of the architecture of Guarino Guarini is the contrast between the real static system and the apparent one. The first consists of the structures that actually provide support for the building; ...
  • Papayianni, Ioanna; Anastasiou, Eleftherios; Papachristoforou, Michael; Liapis, Alexandros (2016-05)
    Steel Slags are by-products of Steel Industry using the Electric Arc Furnace method for steelmaking. This methodology is widely used in South Europe where the research on steel slag applications in concrete has been ...
  • Barberio, Maurizio; Colella, Micaela; Fallacara, Giuseppe (2016-05)
    The paper describes the students’ works, which included posters and physical models, were the partial outcomes of the current 3rd year design studio, led by Prof Giuseppe Fallacara and taught with the support of Maurizio ...
  • Süleyman, Adanur; Murat, Günaydın (International Conference on Architecture and Urban Design, 2012-04-19)
    Fiber reinforced polymer (FRP) composites have found increasingly wide applications in civil engineering due to their high strength-to-weight ratio and high corrosion resistance for last two decades. This paper presents ...
  • Osmani, Skender; Hoxha, Perparim (International Balkans Conferance on Challenges of Civil Engineering, 2013-05-23)
    In this paper the following problems are treated: - Estimation of the mean value of a random function Z(x), defined in a stochastic finite element v, (SFE), zv= 1 ∫ ( ) where the distributions of Z(x) at each node are ...

Search DSpace


Browse

My Account