Browsing ISCE 2012 by Title

DSpace Repository

Browsing ISCE 2012 by Title

Sort by: Order: Results:

  • A matlab program for plastic analysis of 2-d frames 
    Marsel Nakuci; Department of Civil Engineering, Faculty of civil engineering, Polytechnic University of Tirana; Soen Sako; Department of Civil Engineering, Faculty of civil engineering, Polytechnic University of Tirana (International Student Conference of Civil Engineering, 2013-07-15)
    This paper describes a program for plastic analysis of 2-d frames written in matlab programming language. The program is developed using the object oriented programming approach as an alternative to traditional procedural ...
  • A new modeling approach in the pushover analysis of masonry structures 
    Oltion Korini; EPOKA University; Huseyin Bilgin; EPOKA University (International Student Conference of Civil Engineering, 2013-07-15)
    In this study, the pertinency of different numerical techniques for the analysis of masonrystructures is investigated on a full-scale masonry specimen. Two approaches are taken intoaccount. Namely, the nonlinear FEM modeling ...
  • An Electrical Elevator Projection, using MathCAD Software and Modeling Elevator Actualization 
    Alfred Hasanaj; Department of Mechanics, Polytechnic University of Tirana (International Student Conference of Civil Engineering, 2013-07-15)
    In this work we will handle the problem of electric elevator projection, based on specificdemands. After giving a general view of the elevator as a mechanical device, we willdevelop its structure and stimulate elevators ...
  • Analysis of Cost and Schedule Variances in Construction Works with Artificial Intelligence Approaches: The Case of Turkey 
    Savas Bayram; Department of Civil Engineering, Erciyes University; Mehmet Emin Ocal; Department of Civil Engineering, Cukurova University; Emel Laptali Oral; 3Department of Civil Engineering, Cukurova University (International Student Conference of Civil Engineering, 2013-07-15)
    Realistic estimation of construction cost is a vital issue for both successful planningand completion of every construction project. However, fluctuations in input prices due to the unexpected changes in factors like ...
  • Applications and Limitations of Geotechnical Classification Systems 
    Megi Rusi; Department of Applied Geology, Geoinformatics and Environment, Polytechnic University of Tirana; Arbi Shehu; Department of Mineral Resources Engineering, Polytechnic University of Tirana (International Student Conference of Civil Engineering, 2013-07-15)
    During the feasibility and preliminary design stages of a project, when not enoughdetailed information on the rock mass and its stress and hydrologic characteristics is available,the use of a rock mass classification scheme ...
  • Calculation of equivalent lateral seismic forces based on ASCE 7-02 and KTP 2-89 
    Drit Sokoli; Department of Civil Engineering, EPOKA University; Yavuz Yardim; Department of Civil Engineering, EPOKA University (International Student Conference of Civil Engineering, 2013-07-15)
    This paper describes the equivalent lateral force procedure according KTP 2-89 andASCE 7-02, and it gives light upon the differences between these two standards. KTP 2-89has not been updated for a long time now, as of year ...
  • Comparison of residual shear strength determined by different methods 
    Aysegul Bayin; Faculty of Civil Engineering, Istanbul Technical University; Mustafa Hatipoglu; Faculty of Civil Engineering, Istanbul Technical University; Gokhan Cevikbilen; Faculty of Civil Engineering, Istanbul Technical University; Recep Iyisan; Faculty of Civil Engineering, Istanbul Technical University (International Student Conference of Civil Engineering, 2013-07-15)
    The shear stress of stiff or dense soils increases with the displacement and reaches itsmaximum value, and then shear stress decreases and remains a constant value. The minimumand constant shear stress of soils reached at ...
  • Computer software in helping the solution of planar mechanisms synthesis 
    Enri Saliko; Department of Mechanical Engineering, Politechnic University of Tirana; Miranda Kullolli; Department of Mechanical Engineering, Politechnic University of Tirana (International Student Conference of Civil Engineering, 2013-07-15)
    Mechanisms are mechanical devices widely used in a large number of applicationsincluding household appliances, toys, automobiles and machines, are essential in thedevelopment and functioning of almost every machine.Synthesis ...
  • Conditional Assessment of Historical Structures: Earthquake Performance of Naziresha Mosque 
    Enea Mustafaraj; Epoka University; Yavuz Yardim; Epoka University (International Student Conference of Civil Engineering, 2013-07-15)
    The Naziresha Mosque is one of the most important historical buildings built during the Ottoman period, still functional in Albania. It is located in Elbasan, a city in the center of Albania. Naziresha mosque was built ...
  • Construction Materials In Historical And Monumental Buildings - Gjirokaster 
    Kreshnik Merxhani; Cultural Heritage without Borders (CHwB),; Elena Mamani; Cultural Heritage without Borders (CHwB), (International Student Conference of Civil Engineering, 2013-07-15)
    In 2005, Gjirokastra was declared a UNESCO protected site. These give priority to the protection to the town from a general urban point of view. But, upon closer inspection, onecan see that the architecture of this city ...
  • Determination of Mechanical Properties of Concrete by Destructive and Non-Destructive Experimental Methods 
    T. U. Ulusoy; Department of Civil Engineering, Istanbul Kultur University; Y. Yazicioglu; Department of Civil Engineering, Istanbul Kultur University (International Student Conference of Civil Engineering, 2013-07-15)
    This paper examines the mechanical quality differences of concrete by destructive and non destructive methods according to shape, dimension relationship and cure conditions. Within destructive methods, (compression, tension, ...
  • Dynamic Response of Structures with TMD 
    Brisid Isufi; Department of Structural Mechanics, Polytechnic University of Tirana; Luan Murtaj; Department of Structural Mechanics, Polytechnic University of Tirana (International Student Conference of Civil Engineering, 2013-07-15)
    A Tuned Mass Damper (TMD) is a device consisting of a mass, a spring and a viscous damper attached to a vibrating main system. The principles of it are classic but applying them has become possible only after the progress ...
  • Effect of Scour on Load Carry Capacity of Piles on Mat Bridge 
    Erion PERIKU; Department of Civil Engineering, EPOKA University; Yavuz YARDIM; Department of Civil Engineering, EPOKA University (International Student Conference of Civil Engineering, 2013-07-15)
    Critical scour effects on bridge performance helps to predict the bridge load carryingcapacity and as a result, may help prevent unnecessary looses. Very few studies have beenconducted on current condition of Albanian ...
  • Evaluation of seismic analysis procedures for seismic actions: A Comparative study between Eurocode 8 and KTP-89 
    Idlir Frangu; Epoka University; Huseyin Bilgin; Epoka University (International Student Conference of Civil Engineering, 2013-07-15)
    The objective of this paper is to address the seismic design considerations for a case study building by using Eurocode 8 and the Albanian seismic code KTP-89 regulations. The parameter which is taken into account in this ...
  • Geopolymer Concrete Production by Activating Alkaline With Silica Sand, Blast Furnace Slag and Fly Ash 
    Hanifi Binici; Department of Civil Engineering, KSU University; Fatih Binici; Department of Civil Engineering, Erciyes University; Mustafa Dolaz; Department of Environment Engineering, KSU University (International Student Conference of Civil Engineering, 2013-07-15)
    In this paper, it was aimed to manufacture a functional geopolymer structure by activating silica sand, fly ash disposed from Afsin-Elbistan Thermal Power Plant and blast furnace slag obtained from Iskenderun Ferrous & ...
  • How the Great Pyramid of Giza was built. An Engineering View 
    Aida Tasellari; Polytechnic University of Tirana; Erjon Kaiku; Polytechnic University of Tirana (International Student Conference of Civil Engineering, 2013-07-15)
    Today, more than forty centuries after the Pyramids at Giza were completed, the fact of how they were constructed remains a mystery. Although several hypotheses have been advanced, this pyramid has successfully kept the ...
  • Industrial Pavements Design 
    Eda Gjeka; Faculty of Civil Engineering, Polytechnic University of Tirana; Julian Kasharaj; Faculty of Civil Engineering, Polytechnic University of Tirana; Igli Kondi; Faculty of Civil Engineering, Polytechnic University of Tirana (International Student Conference of Civil Engineering, 2013-07-15)
    The objective of this research is to describe a set of specific techniques and procedures for the proper construction of concrete pavements for industrial use, usually referred to as industrial pavements.In particular, we ...
  • Integration of Project Scheduling with BIM Visualization - 4D Modeling 
    Merve S. Oner; Department of Civil Engineering, EPOKA University; Ahmet Oztas; Department of Civil Engineering, EPOKA University (International Student Conference of Civil Engineering, 2013-07-15)
    The aim of this paper is to discuss and explain key concepts in new generation Project management software in the construction industry. Building information modeling "BIM" is considered to be one of the major technologies ...
  • LIGHTNING SIMULATION STUDY ON LINE INSULATORS (Surge arresters) (110kV Overhead Power Line "Fierze F. Arrez - HC Dardhe") 
    Rejnald Zylfi; Departament of Electrical Systems of Power, Polytechnic University of Tirana; Aldi Mucka; Departament of Electrical Systems of Power, Polytechnic University of Tirana (International Student Conference of Civil Engineering, 2013-07-15)
    During the designing phase of the line of a private power plant was made a study of howthe atmospheric discharges from lighting impulses could affect the working regime of a newpower Hydro Power plant under construction ...
  • Load-Deflection Behaviour of Frp Concrete Composite Deck 
    Payam Sarir; Department of Civil Engineering, University KEBANGSAAN Malaysia (UKM),; Omid Monshi Toussi; Department of Civil Engineering, University KEBANGSAAN Malaysia (UKM), (International Student Conference of Civil Engineering, 2013-07-15)
    Nowadays, Fiber Reinforced Polymer (FRP) concrete composite bridge deck system hasbeen introduced because of its light-weight and durability. Strong composition is neededbetween FRP and concrete to acquire the structural ...

Search DSpace


Browse

My Account